A diamond face is widest at the cheekbones, with a narrower forehead and a narrower, often pointed chin. It is the least common of the six shapes and usually the most sculpted. Because glasses sit right across the cheekbones, they can either compete with them or frame them. The aim is to add a little width at the brow line and keep the lower edge of the frame soft.
Confirm that your face is diamond
Diamond is defined by a narrow top and bottom around wide cheekbones:
- Jaw ÷ cheekbones: 0.77 or less, a clearly narrower lower face.
- Forehead ÷ cheekbones: also relatively low. This is what separates diamond from heart, where the forehead is wide.
- Length ÷ width: around 1.44, close to oval.
The face shape detector measures forehead, cheekbone and jaw width from a selfie and shows a probability for each shape. If you are between diamond and heart, compare your forehead width with your cheekbone width, or read both guides.
The goal: widen the brow line, soften the cheekbones
Contrast works here through placement. A frame with presence at the top, such as a browline or a cat-eye that rises toward the temples, adds width where the forehead is narrower. Curved lower rims, or no lower rim at all, keep the frame from adding another hard line across the cheekbones.
Best frame shapes for a diamond face
| Frame | Why it works on a diamond face | Notes |
|---|---|---|
| Browline Frames | A strong top bar adds width to a narrower brow line | Thin metal lower rims keep the cheeks light |
| Cat-Eye Frames | Upswept corners lift the eye line and echo the cheekbones gracefully | Suits women and men in subtle versions |
| Oval frames | Soft curves balance angular cheekbones | A versatile everyday choice |
| Round Wire Frames | Curves soften the angles of the face | Choose a lens wide enough to reach the cheekbones |
| Rimless or semi-rimless frames | Very little outline at cheekbone level | Good for a minimal look |
Browline, cat-eye and round wire frames are the diamond-face styles our report renders on your own photo.
Frame width and depth
The frame should be about as wide as your cheekbones, which on a diamond face also means wider than your temples. A narrow frame sits inside the cheekbones and makes them look even wider by comparison. Pay attention to depth as well: high cheekbones can touch the lower rim, especially when you smile. If the frame lifts or leaves marks on your cheeks, it is too deep or sitting too low; a shallower lens or adjustable nose pads fix that.
Bridge and eye spacing
The glasses tool measures interpupillary distance divided by cheekbone width, with about 0.46 as balanced. Because diamond faces have wide cheekbones, this ratio can come out a little low even when the eyes are evenly spaced, so judge the bridge by the gap between your eyes in the mirror as well. Closer-set eyes look more open with a clear, thin or keyhole bridge; wider-set eyes look closer with a darker or thicker one. Adjustable nose pads help lift the frame off prominent cheekbones.
Where the top of the frame should sit
The top rim should sit along the brows or very slightly above them at the outer corners. On a diamond face this is the most useful line on the frame: it adds width to the upper face and connects the forehead with the cheekbones. Frames that sit low, with a gap above the rim, push attention down onto the cheekbones.
Rim weight and frame color
Put the weight on top: a darker or thicker upper rim with a lighter or invisible lower rim is the ideal structure, which is exactly what browline and many cat-eye frames do. Choose the color from your coloring. Warm seasons suit tortoiseshell, bronze, olive and gold; cool seasons suit black, charcoal, burgundy and silver. Find your season with the personal color analysis and see frame colors per season in the 12-season color guide.
Sunglasses for a diamond face
Cat-eye and browline sunglasses are the strongest choices, followed by oval and rimless styles. Oversized sunglasses work if the top line is straight or slightly upswept and the frame clears your cheeks. Check the fit with a smile, because sunglasses tend to be deeper than optical frames.
Picks for women and men
- Women: a cat-eye in tortoiseshell, a browline frame with a gold lower rim, a semi-rimless oval, cat-eye sunglasses.
- Men: a browline frame in dark acetate and metal, an oval acetate frame, round wire frames, browline sunglasses.
What to avoid
- Narrow frames that sit inside the cheekbones.
- Heavy lower rims and bottom-heavy shapes, which add width at cheekbone level.
- Small, sharp geometric frames, which echo the angles of the cheekbones.
- Deep lenses that rest on the cheeks, which are uncomfortable and push the frame up.
Prescription strength and lens thickness
Strong minus (short-sighted) lenses are thicker at the edges, and wide frames, which diamond faces need, make those edges thicker still. A browline frame with a solid top bar hides part of the edge, and high-index lenses keep the lower half slim. Strong plus (long-sighted) lenses are thickest in the centre and magnify the eyes, so keep the lens height moderate. Your optician should take your pupillary distance and fitting heights, which also matters on diamond faces because the frame is often adjusted to clear the cheekbones; our measurements are for styling only.
Diamond blends
- Diamond leaning heart (wider forehead): keep the top lighter and choose aviators or ovals. See glasses for a heart face.
- Diamond leaning oblong (length ÷ width above about 1.50): choose deeper browlines and frames with some weight at the temples. See glasses for an oblong face.
How to try frames on
In a shop, smile in each frame and check that it does not lift off your nose, then step back and photograph it from about one metre away. Online, see the frames on your own face rather than on a model. The full report renders four eyewear styles chosen for your measurements on your own photo (see pricing). If you have a specific pair in mind, the Try-On Studio takes a photo of any frame, gives a compatibility rating for your face and renders it on your selfie.
Free tool
Measure it on your own face
Get frame shapes matched to your face shape, plus bridge advice from your measured eye spacing, then try them on virtually.
Open Glasses FinderFrequently asked questions
What glasses suit a diamond face?
Frames with presence at the top and soft or no lower rims: browlines, cat-eyes, ovals, round wire frames and rimless styles. They add width at the brow line and soften the cheekbones.
Why do my glasses touch my cheeks?
High cheekbones can meet the lower rim, especially when you smile. A shallower lens, adjustable nose pads or a frame adjustment by your optician lifts the frame off the cheeks.
How wide should glasses be for a diamond face?
About as wide as your cheekbones, which is wider than your temples. Frames that sit inside the cheekbones make them look wider by comparison.
Are browline glasses good for a diamond face?
Yes, they are one of the best choices. The strong top bar adds width to the narrower forehead, and the thin lower rim keeps the cheekbone area light.
Is a diamond face rare?
It is usually described as the least common of the six shapes, and many people are a blend of diamond with oval or heart. The face shape detector shows the probability for each shape so you can see your blend.
References
- Farkas LG (1994). Anthropometry of the Head and Face (2nd ed.). Raven Press, New York.
- Kartynnik Y, Ablavatski A, Grishchenko I, Grundmann M (2019). Real-time Facial Surface Geometry from Monocular Video on Mobile GPUs. CVPR Workshop on Computer Vision for AR/VR.
- Jackson C (1980). Color Me Beautiful. Acropolis Books, Washington DC.