An oblong face, also called a long or rectangular face, is noticeably longer than it is wide, with forehead, cheekbones and jaw of similar width. It often reads elegant and mature. Glasses are one of the most effective ways to balance that length, because a frame adds a strong horizontal element right across the middle of the face.
Confirm that your face is oblong
Oblong is defined mostly by length:
- Length ÷ width (upper forehead to chin, divided by cheekbone width): 1.55 or more. An oval face sits around 1.48.
- Jaw ÷ cheekbones: around 0.76, with fairly straight sides.
A tall forehead or a long lower third can each push the ratio up. The face shape detector measures the overall ratio, and the golden ratio calculator breaks the length into thirds, which tells you where the extra length sits. If your second shape is oval or square, see the blend notes below.
The goal: add width, break up the length
The classic rule for oblong faces is to create horizontal lines and cover a little more vertical space in the middle of the face. Deep lenses take up more of the midface, wide frames extend the face sideways, and a strong top bar or decorative temples add a horizontal line. Narrow, shallow frames do the opposite and make the face look longer.
Best frame shapes for an oblong face
| Frame | Why it works on an oblong face | Notes |
|---|---|---|
| Oversized Square Frames | Larger lenses add width and cover more of the midface | Keep them to face width so they do not overwhelm |
| Browline Frames | A strong top bar adds a horizontal line | Choose a deep lower rim, not a shallow one |
| Aviator Frames | Deep teardrop lenses fill the midface | Double bridges add another horizontal line |
| Round Wire Frames | Curves soften straight sides | Choose a large, deep round lens |
| Deep rectangular acetate | A tall rectangle adds width and depth | Avoid slim, narrow rectangles |
| Frames with decorative temples | Detail at the hinges widens the face visually | Works on both optical and sunglasses |
Oversized square, browline, aviator and round wire frames are the oblong-face styles our report renders on your own photo.
Frame width and depth
Width should be about the same as your face at the cheekbones, or very slightly wider; a frame narrower than the face leaves straight sides visible and emphasises length. Depth is the second lever. A lens height at the upper end of what is comfortable, with the lower rim landing near the middle of the nose, shortens the visible midface. If your frames have always felt "too small" on you, depth is usually the reason.
Bridge and eye spacing
A low-set bridge, or a dark, solid bridge, adds a horizontal line across the nose and visually shortens it, which is helpful on a long face. Eye spacing fine-tunes this. The glasses tool measures interpupillary distance divided by cheekbone width, about 0.46 being balanced. Oblong faces are relatively narrow, so the ratio can come out a little high even when the eyes are evenly spaced; check the gap in the mirror as well. Wider-set eyes are drawn together by a darker or thicker bridge, and closer-set eyes look more open with a clear or keyhole bridge.
Where the top of the frame should sit
The top rim should sit along the brows. On an oblong face a frame placed too low leaves a gap above it, which adds to the length of the face. A browline frame or a strong top bar that lines up with the brows is the simplest way to get this right.
Rim weight and frame color
Medium to bold rims, contrast between the top and bottom of the frame, and two-tone or decorated temples all add horizontal weight. Very thin wire frames add less, so pick them larger and deeper if you prefer metal. Choose the color from your coloring. Warm seasons suit tortoiseshell, amber and gold; cool seasons suit black, navy, grey and silver; high-contrast coloring carries bold black frames well. Find your season with the personal color analysis and see frame colors per season in the 12-season color guide.
Sunglasses for an oblong face
Oblong faces suit oversized sunglasses better than any other shape. Large square, wraparound-style and deep aviator sunglasses all work. Choose wide temples or a double bridge for extra horizontal lines, and make sure the lenses are deep enough to cover from brow to mid-nose.
Picks for women and men
- Women: oversized square frames in tortoiseshell, a deep browline, large round wire frames, oversized square sunglasses.
- Men: a deep rectangular acetate frame, a browline frame, double-bridge aviators, wide square sunglasses.
What to avoid
- Narrow, shallow frames, which leave length above and below them.
- Small rimless frames, which add almost no width or horizontal line.
- Frames narrower than the face, which leave straight sides visible.
- Frames sitting low on the nose, which open a gap that lengthens the face.
Prescription strength and lens thickness
Deep, wide frames are the best fit for oblong faces, but they are also the frames where lens thickness shows most. With a strong minus (short-sighted) prescription the edges get thicker as the lens gets larger, so choose thick acetate rims that hide the edge, and ask about high-index lenses. Strong plus (long-sighted) lenses are thickest in the centre and magnify the eyes; a large lens adds weight, so a medium depth with bold temples gives you the width without the thickness. Let your optician take your pupillary distance and fitting heights; our measurements are for styling only.
Oblong blends
- Oblong leaning oval (ratio around 1.50 to 1.55): moderate depth is enough, and most shapes work. See glasses for an oval face.
- Oblong leaning square (strong, wide jaw): add curves with large round frames or aviators. See glasses for a square face.
Hair helps too: fringes and volume at the sides shorten a long face and work well with deep frames.
How to try frames on
In a shop, check each frame from about one metre away and photograph it, paying attention to how much of the nose shows below the frame. Online, see frames on your own face rather than on a model. The full report renders four eyewear styles picked for your measurements on your own photo (see pricing). For a specific pair, the Try-On Studio takes a photo of any frame, rates how well it suits your face and renders it on your selfie.
Free tool
Measure it on your own face
Get frame shapes matched to your face shape, plus bridge advice from your measured eye spacing, then try them on virtually.
Open Glasses FinderFrequently asked questions
What glasses suit an oblong face?
Deep, wide frames that add horizontal lines: oversized squares, deep browlines, aviators, large round frames and frames with decorative temples. Keep the frame about as wide as your face.
Are oversized glasses good for a long face?
Yes. Oblong faces suit oversized frames better than any other shape, because large, deep lenses cover more of the midface and add width. Just keep the frame from extending far past your face.
Why do glasses look too small on my long face?
Usually because the lenses are too shallow. Frames with a low lens height leave length above and below them. Look for a deeper lens and a top rim that sits along the brows.
What is the difference between an oblong and an oval face?
Length. An oval face has a length-to-width ratio around 1.48, an oblong face 1.55 or more with straighter sides. The face shape detector measures the ratio from a selfie.
Do rimless glasses suit an oblong face?
Small rimless frames add little width, so they tend to emphasise length. If you prefer rimless, choose a wide, deep lens shape or a semi-rimless frame with a strong top bar.
References
- Farkas LG (1994). Anthropometry of the Head and Face (2nd ed.). Raven Press, New York.
- Kartynnik Y, Ablavatski A, Grishchenko I, Grundmann M (2019). Real-time Facial Surface Geometry from Monocular Video on Mobile GPUs. CVPR Workshop on Computer Vision for AR/VR.
- Jackson C (1980). Color Me Beautiful. Acropolis Books, Washington DC.