TheFaceRating

The Best Haircuts for Men with a Heart-Shaped Face

Men's haircuts for a heart-shaped face: fringes that soften a wide forehead, tapers instead of skin fades, beards that widen the chin, and a barber script.

By the TheFaceRating Editorial Team · editorial policyPublished

A heart-shaped face, sometimes called an inverted triangle, is broad across the forehead and cheekbones and narrows to a slimmer chin. Many men with this shape also have a widow's peak. It puts the focus on the eyes and cheekbones, and a good men's cut keeps it there while bringing the upper and lower face closer together: soften the forehead with some fringe, keep the crown calm, avoid stripping the sides bare, and use facial hair to add weight at the chin. This guide covers the cuts that do that, the ones that work against it, and how to brief your barber.

Women's cuts for the same shape are in hairstyles for women with a heart-shaped face, and the combined heart-face guide covers both.

Heart, or diamond?

Both shapes have a narrow chin; the difference is the forehead.

RatioHeart reading
Face length ÷ cheekbone width≈ 1.41
Jaw width ÷ cheekbone width0.72 or less
Forehead width ÷ cheekbone width≈ 0.86

Quick check: with your hair pushed back, hold a ruler or a pen horizontally across your forehead at the temples, then across your jaw just below the earlobes. On a heart face the forehead line is obviously longer. If your temples are noticeably narrower than your cheekbones too, you lean diamond. The face shape detector measures all three widths and shows both probabilities.

The goal for men: soften the top, add weight below

Three moves balance a heart face. A fringe or forward texture covers part of the forehead and makes it read narrower. No extra height at the crown, since that makes the top of the face bigger. And some fullness at the sides, kept with a taper or scissor cut rather than a high skin fade, so the temples don't look even wider than the jaw. A beard is the easiest way to add the missing width at the chin.

The best haircuts for men with a heart-shaped face

1. Curtain Fringe (Middle Part)

8–12 cm at the front, center-parted and falling toward the outer brows, with a scissor taper at the sides. The curtains cover the corners of the forehead, which is where a heart face is widest. Best on wavy or straight hair with movement; casual to creative office. If you have a widow's peak, a center part sits naturally on it.

2. Messy Fringe

5–7 cm on top pushed forward with loose texture, and the sides at a #3–#4 taper. Forward texture breaks up the forehead and adds a relaxed look. Two minutes with a sea-salt spray; just keep the fringe off the eyes, or it starts to read younger than you might want.

3. Textured French Crop with a taper

2–4 cm on top with a choppy fringe, and a low taper (#2 at the bottom to #4) instead of a skin fade. It is the shortest cut that still softens the forehead, and the taper keeps a little width at the sides. Very low maintenance.

4. Classic Side Part with a side-swept fringe

6–8 cm on top, combed to the side so the front falls diagonally across part of the forehead, with scissor-cut sides at around 2 cm. The diagonal fringe narrows the forehead visually and keeps the cut formal enough for work.

5. Medium Flow (Bro Flow)

Hair grown to the ears or just past, swept back loosely or tucked. Length at the sides adds width toward the jaw, which a heart face benefits from. It suits wavy hair; plan for an awkward stage while growing it.

6. Short scissor cut with a fringe

About 3–5 cm all over, cut with scissors, with the front left a little longer and worn forward. It avoids clipper lines entirely, keeps the outline soft and suits fine hair and men who want an understated cut.

What to skip, and why

  • Tall quiffs and pompadours add height and bulk at the top, which makes the chin look narrower.
  • A full slick-back exposes the whole forehead, the widest part of the face, with nothing below to balance it.
  • High skin fades strip the temples and leave the forehead looking wider than the jaw; a taper does the same tidy job with more balance.
  • Spiky, upward styles draw the eye to the top of the head.

Adjusting for hair type and hairline

Fine or straight hair suits a French crop or a short scissor cut with the fringe worn forward; it lies flat naturally, which keeps the crown calm.

Thick hair needs thinning at the crown so the top doesn't puff up, while the sides can stay a little fuller.

Wavy hair is ideal for the curtain fringe and the medium flow. Let it air-dry with a light cream so the waves fall forward and outward.

Curly or coily hair looks best with the curls worn forward over the forehead and the sides tapered rather than faded high: a curly fringe with a low taper, or short twists with a soft temple line instead of a sharp, high line-up.

A widow's peak or receding hairline is easy to soften with a forward fringe or a messy crop pushed down at the front. Avoid slicking back, which shows the full hairline. If thinning is sudden or patchy, see a dermatologist.

Beards: adding width at the chin

A beard is the single most effective change for many men with a heart face, because it fills out the narrower lower face. A short full beard or a boxed beard of 1–2 cm, kept a little fuller at the jaw and chin than at the cheeks, balances the wider forehead. A chin-focused beard such as a full goatee also works. Avoid a pointed, narrow chin beard, which repeats the taper of the face. Stubble helps less than a fuller beard, but even 5 mm adds some weight to the jaw.

What to tell your barber

"Textured French crop with a taper, not a skin fade. Number 2 at the bottom of the sides, blending to a #4 at the temples. About 3 cm on top, point-cut and choppy, with the fringe left at 3 cm and worn forward. Keep the crown flat."

"Curtain fringe: leave 10 cm at the front so it reaches my outer brows when center-parted, about 6 cm at the crown, scissor taper at the sides around 2 cm. Texturize the ends so it falls apart at the part."

See it on your face before you cut

Confirm heart versus diamond with the face shape detector. The AI hairstyle try-on suggests cuts for your proportions, and the full report renders six on your own photo, such as a Curtain Fringe or a Messy Fringe, with your features unchanged. Frames matter for this shape as well: glasses for a heart face covers the ones that balance a wide brow line. All shapes are compared in the hairstyles by face shape hub.

Free tool

Measure it on your own face

Detect your face shape, get the haircuts that balance it, and preview six of them on your real photo with identity-preserving AI.

Open AI Hairstyle Try-On

Frequently asked questions

What haircut suits a man with a heart-shaped face?

Cuts with a fringe and calm height: a curtain fringe, a messy fringe, a textured French crop with a taper, or a classic side part with the front swept across the forehead.

What beard suits a heart-shaped face?

A short full or boxed beard kept slightly fuller at the jaw and chin. It adds width to the narrower lower face. Avoid a narrow, pointed chin beard.

Should men with a heart face avoid fades?

Not entirely. A low taper works well. High skin fades strip the temples and make the forehead look wider than the jaw, so they are the ones to skip.

How do I style a widow's peak with a heart face?

Wear the front forward, as a messy fringe, a French crop or a curtain fringe parted at the peak. Slicking it back shows the full hairline and the widest part of the face.

Can a man with a heart face wear a quiff?

A tall quiff adds width and height at the top. If you like the look, keep the lift under about 3 cm and let the front fall slightly forward.

References

  1. Farkas LG (1994). Anthropometry of the Head and Face (2nd ed.). Raven Press, New York.
  2. Kartynnik Y, Ablavatski A, Grishchenko I, Grundmann M (2019). Real-time Facial Surface Geometry from Monocular Video on Mobile GPUs. CVPR Workshop on Computer Vision for AR/VR.